Specifications

BrightEye 2
29
www.ensembledesigns.com tel [phone]
Specications
Analog Input
Number One
Type Beta/SMPTE, Y, Pr, Pb
NTSC, PAL Composite
NTSC, PAL S-Video
Impedance 75 Ω
Return Loss >40 dB
Input DC +/-1 volt DC
Input Hum <100 mV
Serial Digital Output
Number One
Type 270 Mb/s SD Serial Digital
(SMPTE 259M)
Impedance 75 Ω
Return Loss >15 dB
Output DC None (AC coupled)
Analog to SDI Performance
Bit Resolution 12 bit input quantization
4 x oversampling
Signal to Noise >62 dB, weighted
Frequency Response
Composite and Y ±0.1 dB, 0 to 5.5 MHz
Pr, Pb ±0.1 dB, 0 to 2.75 MHz
Minimum Delay 90 µSec
General Specications
Size 5.625” W x 0.8” H x 5.5” D
(143 mm x 20 mm x 140 mm)
including connectors
Power 12 volts, 5 watts
(100-230 VAC modular power supply
not included)
Temperature Range 0 to 40° C ambient
Relative Humidity 0 to 95%, non-condensing
SD SDI Out
Cpst, Y In
Pr, C In
Pb In
Source
Select
Serializer
Proc
Amp
12 bit
Video
A to D
Converter
and
Decoder