Specifications

11
www.ensembledesigns.com tel [phone]
Easily Congured For Your
Needs in the Field
Pelican 1430 Top Loader Case
Modied with side opening for connector bay and Anton/
Bauer Battery Gold Mount.
Machined aluminum top plate and framework
Provides mounting for up to 6 single high BrightEyes, or
three double high BrightEyes (or combination). Includes
one single high and two double high blank plates.
Power and Control System
100-230 VAC 50/60Hz universal power supply suitable
for worldwide operation. Automatic detection/selection
of AC versus battery power (BrightPak is not a charger
for the battery). BrightPak will switch automatically
to battery if the AC power is lost – without any on-air
glitch or interruption. IEC power connection installed
in the connector side bay. Power on/o switch, AC/
Battery indication, and Low Battery Indicator on top
plate. Internal fan-out connections of 12 volt power for
use with BrightEyes and/or other user-supplied devices.
Internal USB Hub with Neutrik 'D' type USB connector. USB
connector can be installed in connector side bay or on top
plate as desired.
Connector Support
Connector bay on side of BrightPak provides
openings for:
• 1 IEC AC power input connector
(internally connected to power system)
• 12 Neutrik/Switchcraft 'D' type connector positions
(connectors not included)
• 1 Mounting position for Stratos HMA Flange mount
expanded beam optical connector (connector not
included)
Connection positions on top plate of BrightPak provide:
• 6 Neutrik/Switchcraft 'D' type connector positions
(connectors not included)
Battery Mount
Includes an Anton/Bauer Gold Mount Battery connector
plate installed on side of case and wired into power
system. Suitable for use with all Anton/Bauer batteries.
Does not include battery. Mounting systems for alternate
batteries available upon request. Typical operating time
with a high capacity battery, one BrightEye 90-F, one
BrightEye 47, and one BrightEye 24, is three to four hours.
Control Video and Audio Parameters
The BrightPak Basic Kit includes a "D" mount USB
connector, an internal USB hub, and all cables needed to
support three BrightEye units. The USB connector can be
installed in either the side bay or on the top plate. A laptop
connected to that connector will have full control over all
of the BrightEye units.
Built from a tough, Pelican case, it will stand up to a
lot of abuse.
Congure the versatile connector bay to provide exactly
the inputs and outputs you need.