Specifications

BrightEye 71
101
www.ensembledesigns.com tel [phone]
Specications
Serial Digital Input
Number One
Type HD Serial Digital 1.485 Gb/s
SMPTE 274M, 292M or 296M
or SD Serial Digital
270 Mb/s SMPTE 259M-C
Impedance 75 Ω
Return Loss >15 dB
Max Cable Length 100 meters for HD
300 meters for SD
(Belden 1694A)
Automatic Input Cable Equalization
HD Standards Supported:
1080i (SMPTE 274M -4,5,6) 50, 59.94 or 60 Hz
720p (SMPTE 296M -1,2,3) 50, 59.94 or 60 Hz
1080p (SMPTE 274M -9,10,11) 23.98, 24, 25 Hz
1080sF (RP211 -14,15,16) 23.98, 24, 25 Hz
Serial Digital Output
Number One
Type Follows input
Impedance 75 Ω
Return Loss >15 dB
Output DC None (AC coupled)
Analog Audio Inputs
Number Eight
(selectable as inputs or outputs)
Type Balanced
Impedance >15K Ω
Maximum Input Level 24 dBu
CMRR >60 dB, 20 Hz to 10 KHz
Quantization 24 bits, 128 x oversampled
Sample Rate 48 KHz
Reference Level -10 dBu or +4 dBu
Frequency Response ±0.1 dB, 20 Hz to 20 KHz
Crosstalk <106 dB
Dynamic Range >106 dB
Analog Audio Outputs
Number Eight
(selectable as inputs or outputs)
Type Balanced, transformerless
Impedance 30 Ω
Maximum Output Level 24 dBu
Resolution 24 bits, 128 x oversampled
Reference Level -10 dBu or +4 dBu
Frequency Response ± 0.1 dB, 20 Hz to 20 KHz
Crosstalk <106 dB
Dynamic Range >106 dB
Embedded Output (In SDI Outputs)
Group Assign Cascade, or Replace any
two of four groups
Channels Eight
Bit Depth 24 Bit
General Specications
Size 5.625” W x 0.8” H x 5.5” D
(143 mm x 20 mm x 140 mm)
including connectors
Power 12 volts, 8 watts
(100-230 VAC modular power
supply not included)
Temperature Range 0 to 40° C ambient
Relative Humidity 0 to 95% non-condensing
Altitude 0 to 10,000 ft.
BrightEye 71 Block Diagrams on following pages