User guide

TM
BrightEye 11-HD
BrightEye-7
OPERATION
Control and operation of the BrightEye 11-HD converter is performed from the
front panel or with the BrightEye PC or Mac Control application.
Some control settings are only available with BrightEye PC or Mac. These parameters
cannot be monitored or controlled with the front panel.
Front Panel Controls and Indicators
The front panel of the converter, shown in the figure below, provides status indi-
cators and control over output selection and gain.
Status Indicators
The following status indicators are provided on the front panel:
Input
Illuminates green when an input for the currently selected video format is
detected on the input connector, HD SDI or SD SDI.
Output
The currently selected output format (Cpst, SMPTE, Beta, or RGB) will
illuminate green.
Gain
Illuminates green when output gain is set to its nominal or unity value.
Illuminates red when gain is set higher or lower than nominal setting.
Pwr (Power)
Illuminates green when power is applied to the converter and the internal
voltage regulator is functioning correctly.
BrightEye 11-HD Front Panel
NOTE: