User guide

TM
BrightEye 11-HD
BrightEye-5
REAR CONNECTORS
All connections to the BrightEye 11-HD converter are made on the rear of the
unit. Refer to the illustration below.
Power Connection
Connect a modular power supply to the 12 volt DC power input connection on the
far left. Use the locking ring to secure it.
USB Connector
The USB connector is used to provide more comprehensive control, diagnostics,
and upgrades to the converter from a personal computer. Use the BrightEye PC
or Mac application included on CD-ROM to make adjustments as described in the
OPERATION section of this data pack.
Input/Output BNCS
There are five rear BNC connectors which are used as inputs and outputs as
follows:
HD/SD SDI In
This BNC input accepts a standard definition (SD) or high definition (HD) serial
digital component signal.
HD/SD SDI Out
The Serial Digital Component signal from the reclocking circuitry is presented on
this connector. This output conforms to the ITU-R 601 standard for serial digital
video, with SMPTE 259M serialization at 270 Mb/s for standard definition; or
SMPTE 274M or 296M for high definition.
BrightEye 11-HD Rear Connectors