User guide

BrightEye 11-HD HD/SD SDI to Analog Converter
• Setup – check the box to add setup to the composite output signal (525 SD
mode). Leave the box unchecked for no setup. This control is only available
on BrightEye PC or Mac. There is no front panel control or indication of this
setting. Setup will be grayed out when a SMPTE, RGB, 625, or HD input
signal is present.
• Vert Blanking – select the blanking width with this pulldown from Wide
(PAL Lines 1-22, NTSC Lines 1-20) or Narrow (PAL Lines 1-6, NTSC Lines
1-9). This control is only available on BrightEye PC or Mac. There is no
front panel control or indication of this setting.
BrightEye-10