User guide

BrightEye 75 HD/SD Analog to Digital Converter and Analog Audio Embedder
BrightEye 75 - Page 10
USING THE BRIGHTEYE CONTROL APPLICATION
The BrightEye PC and BrightEye Mac applications included on CD-ROM are
designed to allow you to configure and control the BrightEye 75 from a personal
computer. Installation and instructions for using this software application are
given in the PDF manual on disk.
If the BrightEye 75 is connected to a computer running this software, the
following menus are available for controlling and monitoring the unit.
Input Menu
•Input Pres– indicates the status of the video input (None, SD 525, SD 625,
HD 525, or HD 625.
•Input Sel– select the type of input signal to the unit from the pulldown as
Composite, Y/C, RGB, SMPTE, Beta, or Bars.
•Analog Setup– set to On if setup is present on the analog input, or Off if
no setup is present.
•Ref Status– indicates the status of a reference video presence
(No Reference or Ref Present).