User guide

BrightEye 94 SD Aspect Ratio Converter
BrightEye 94 - Page 8
Status Indicators
The following status indicators and controls are provided on the front panel:
Embed In
Illuminates green when an embedded audio stream is detected on the SD SDI In
video input BNC.
Mon Vol (Monitor Volume)
Illuminates green when audio monitor volume is set to unity, or red when
set to other than unity. This control affects the audio headset jack output.
Input
Illuminates green when a valid SD video signal is detected on the SD SDI
In video input BNC. Indicates the type of video signal detected on the SD
SDI/Cpst In video input BNC. Choices are SD SDI or Composite.
Ref (Reference) illuminates green when a valid composite or Tri-Level
Sync reference is detected on the Ref input BNC.
Mode
Indicates the output aspect ratio of the output signal. Choices are:
• Anamorphic – original material is converted as needed to 4:3 format.
• 16:9 – original material is converted as needed to 16:9 format.
• 14:9 – original material is converted as needed to 14:9 format.
• 13:9 – original material is converted as needed to 13:9 format.
• Pillar – adds black vertical bars to the right and left sides of original
material to fit the selected output format.
• Crop Sides – sides of original material are center cropped to fit the
selected output format.
• Crop T/B – top and bottom of original material are cropped to fit the
selected output format.
• Manual – illuminates green when the output aspect ratio has been set
manually.
Bars
Illuminates green when color bars are selected for the output.
Graticule
Illuminates green when the on-screen aspect ratio graticule is displayed.
Gain
Illuminates green when video gain is set to unity, or red when set to other
than unity.
Pwr (Power)
Illuminates green when power is applied to the unit and the internal
voltage regulator is functioning correctly.