User guide

BrightEye 94 SD Aspect Ratio Converter
BrightEye 94 - Page 6
REAR CONNECTORS
All connections to the BrightEye 94 are made on the rear of the unit. Refer to the
photo below.
Power Connection
Connect a modular power supply to the 12 volt DC power input connection on the
far left of the unit. Use the locking ring to secure it.
USB Connector
Connect a PC or Mac to the USB connector to enable more comprehensive control,
diagnostics, and upgrades to the BrightEye 94. Use the BrightEye PC or Mac
application included on CD-ROM to make adjustments as described in the
OPERATION section of this user guide.
HDMI Out
Connect an LCD monitor to this port for confidence monitoring of a video feed.
Audio Monitor
Connect a headset to this 3.5 mm mini jack to monitor the pair of audio channels
selected from the Mon Assign control on the Audio Out menu.
Input/Output BNCs
There are five rear BNC connectors used as inputs and outputs as follows:
SD SDI Out
This BNC outputs a timed standard definition SDI video signal with embedded audio.
SD SDI Out
This BNC also outputs a timed SDI video signal with embedded audio.
Cpst Out
This BNC outputs a timed analog composite (NTSC or PAL) video signal.
SD SDI/Cpst In
This BNC input accepts an analog composite video signal or SD SDI serial digital
video signal with or without embedded audio.
BrightEye 94 Rear Connectors