User guide

BrightEye 94 SD Aspect Ratio Converter
BrightEye 94 - Page 12
Manual
• Width – sets the aspect ratio width in percent (range is 30 to 145%,
default is 100%).
• Height – sets the aspect ratio height in percent (range is 30 to 140%,
default is 100%).
• Hor Position – sets the horizontal position of the output (range is -100 to
100, default is 0).
• Ver Position – sets the vertical position of the output (range is -100 to
100, default is 0).
Make adjustments by clicking and dragging the slider controls, by using the up
and down arrow buttons, or by entering a value directly into the field. Click the
Default buttons to return settings to their default values.