Install Guide

Ensemble Communications Inc.
5-6 Operator’s Guide to the Fiberless System
5. Turn on chassis A and B bus circuit breakers.
6. Verify that the fan tray LED is green and that fans are on.
7. Verify that Status LED on each card illuminates and begins
flashing yellow.
Figure 5-3 shows the cards in their appropriate slots.
Figure 5-3. Base Station Front Showing Interface Card Positions
Table 5-1: Interface Card Slots
Slot Interface Card
1 and 2 CIC 1000 (Control Interface Card)
8 and 9 NIC1340 (DS-3 Network Interface
Card)
3-7 and 10-14 MIC1025 (single Modem Interface
Card)
Fastener
Screw
Fastener
Screw
Fan Tray
Status LEDs
CIC MIC NIC MIC
1 2 3 4 5 6 78 91011121314