Install Guide

Ensemble Communications Inc.
5-2 Operator’s Guide to the Fiberless System
Unpacking and Inventory
• Unpack the base station chassis and its components on a flat,
clean surface at the installation site.
WARNING
Keep all interface cards in their antistatic bags in the
shipping box until you are ready to install them.
• Check the quantity of items received against the packing list
and a copy of the purchase order to ensure that you have
received your complete order.
• Inspect all components to determine that they are not dam-
aged. If a component appears to be damaged or is missing, con-
tact your shipper and Ensemble Customer Service
immediately.
• Save all packing materials.
System Components • Fiberless 16-slot base station chassis (CH16000)
• Fan tray assembly
• 1 or 2 Control Interface Cards (CIC1000)
• 1 or 2 Network Interface Cards (NIC1440)
• 1 or more Modem Interface Cards (MIC1025)
• Blank card panels to fill empty slots
• 19-inch (48-cm) and 23-inch (58-cm) rack mount brackets
Note Interface cards are shipped in separate boxes and must be installed on
site.
Note Ensemble does not provide power supplies. See page 10 for
recommended power source information.