User's Manual

Ensemble Communications Inc.
CPE Site Setup 6-7
Vertical Antenna
Polarization
• For a vertical polarized antenna, mount the unit with its two
cable connectors facing down and the “V” is up as shown in
Figure 6-4.
• Line up the bolts in the antenna with the four holes in the
mounting bracket as shown in Figure 6-4.
.
Figure 6-4. Mounting Vertically Polarized ODU
Horizontal Antenna
Polarization
• For a horizontally polarized antenna, mount the unit with its
two cable connectors facing sideways, so that the TNC connec-
tor points downward and the “H” is up as shown in Figure 6-5.
• Line up the bolts in the antenna with the four holes in the
mounting bracket as shown in Figure 6-5.
Figure 6-5. Mounting Horizontally Polarized ODU
BNC
alignment
connector
Drain hole
TNC IF
connector
Drain hole
Antenna
Ground
Points
BNC
alignment
connector
Drain hole
TNC IF
connector
Drain hole
Antenna
Ground
Points