User's Manual

Ensemble Communications Inc.
6-10 Operator’s Guide to the Fiberless System
CPE Indoor
Temperature
The location should meet these temperature allowances, including
enough ventilation to dissipate heat loads of 150 Watts:
50° to 86° F (10° to 40° C)
CPE Indoor Power The CPE indoor unit is normally shipped for use with 120/220
VAC power. When possible, it should be plugged into a dedicated
15 Amp circuit. You may install a small PC-style UPS if desired.
CPE Indoor Grounding For AC systems, ground the indoor unit by connecting its
conductor to a grounded power outlet. The ground conductor on
the power plug must be connected to the building’s electrical
ground.
WARNING
Do not power up the indoor unit until you are instructed to
do so during the initial procedure.