Quick Start Guide

Quick Start 4
Cables connection Figure 1-5
Put back the cover and fasten the screws. Step 6
Installation completed Figure 1-6
Booting up 1.4
 Ensure the input voltage corresponds to the power requirement of the DVR. Turn on the
DVR after the power cable is properly connected.
 To protect the DVR, connect the DVR with the power cable first, and then connect to the
power source.
 To ensure the stable work of the DVR and the connected external devices such as camera
and to prolong the HDD service life, please refer to the related international standard to
use the power source that provides stable voltage with less ripple interference. UPS power
source is recommended.
Connect the DVR to a display. Step 1
Plug in the power cable to the DVR. Step 2
Press the power button to turn on the DVR. The power indicator glows. Step 3