Quick Start Guide

Local Configurations 12
Security questions Figure 3-6
Click Next and then follow the onscreen instructions to complete the password Step 5
resetting.
Adding Remote Device 3.3
You can add remote devices by adding the IP address.
This function is available after having configured the channel type as IP channel by selecting
Main Menu > CAMERA > CHANNEL TYPE.
Select Main Menu > CAMERA > REGISTRATION > Registration. Step 1
The Registration interface is displayed.
Click IP Search. Step 2
The searched devices are displayed.
Add the device by either of the following ways. Step 3
 Double-click the device, or select the check box of the device and then click Add.
 Click Manual Add, configure the parameters and then click Apply.
The device is displayed in the Added Device area. See Figure 3-7.