User Manual

User’s Manual
73
Function Description
View Layout
Configure the live view screen as a single-channel layout or multi-
channel layout.
Previous Screen Click Previous Screen to go to the previous screen. For example, if you
are using 4-split mode, the first screen is displaying the channel 1-4,
click Next screen, you can view channel 5-8.
Next Screen
Add Camera
Open the Camera List interface. For details, see "5.6 Configuring
Remote Devices."
This parameter displays on the right-click menu only after setting at
least one channel to IP type in Main Menu > CAMERA > Channel
Type.
Manual Control
Select Record Mode, you can configure the recording mode as
Auto or Manual, or stop the recording. You can also enable or
disable snapshot function
Select Alarm Mode, you can configure alarm output settings.
Live Mode
Select General, the layout of live view screen is as default.
Select Face, the detected fa
ce snapshots are displayed in the
bottom of the live view screen.
Auto Focus
Point to the channel window and right-click on it to open the shortcut
menu, and then click Auto Focus.
Not all cameras support this function.
Image
Open the Image interface where you can adjust the video image color.
Camera Property Click to modify the camera properties.
Sub Port Click to switch to extra screen control.
5.2.5 AI Preview Mode
You can view the detected faces snapshots and comparison results of detected faces and the faces in
the library, and play back the recorded picture file.
To display the AI preview mode, the face detection function must be enabled. For details, see "5.11.1.1
Face Detection."
Right-click on the live view screen to display the shortcut menu, and then select Live Mode > AI Mode,
the AI preview mode interface is displayed.