User Manual

Table Of Contents
Users Manual
297
5.18.5 Configuring Advance Settings
Create HDD group, and save main stream, sub stream and snapshot of designated channels to the
HDD group.
If the interface displays that "Current HDD Mode is Quota Group", click "Change to HDD Group
Mode", and then configure HDD group.
You can enable either HDD Group Mode or Quota Group. The system prompts to reboot the
device each time when you switch the mode.
Select Main Menu > STORAGE > Disk Group > Disk Group.
The Disk Group interface is displayed.
Select group for each HDD, and then click Apply to complete the settings.
After configuring HDD group, click Main Stream, Sub Stream and Snapshot tabs
respectively, to configure the saving of main stream, sub stream and snapshot information of
different channels to different HDD groups.