User Manual

User’s Manual
264
 China Unicom 3G: ZTE MF667S
 China Telecom 4G: ZTE AC2736
 If the Device is connected to China Telecom 3G/4G network, you can login the Device with the
public IP address through the PC of public internet (The HTTP port is not configured as 80). If the
Device is connected to China Unicom or China Mobile 3G network, which are defined as private
network, therefore you cannot login the Device through PC that is connected to public internet.
 The Ethernet card names that are displayed on the 3G/4G interface are not constant, and they
could be ppp5, ppp6, ppp7 or ppp8 and are different depending on the USB2.0 port on the Device
that is connected to the 3G module.
 If you dial to connect to 3G/4G network, you have to keep trying till succeeded. The default
gateway could be switched depending on the priority of Ethernet cards.
 The China Unicom and China Mobile 3G/4G modules in USB flash disk style do not support EDGE
mode for the moment.
5.15.1.5 Configuring PPPoE Settings
PPPoE is another way for the Device to access the network. You can establish network connection by
configuring PPPoE settings to give the Device a dynamic IP address in the WAN. To use this function,
firstly you need to obtain the user name and password from the Internet Service Provider.
Select Main Menu > NETWORK > PPPoE.
The PPPoE interface is displayed.
Enable the PPPoE function.
In the Username box and Password box, enter the user name and password accordingly
provided by the Internet Service Provider.