User Manual

User’s Manual
242
Select the Enable check boxes to enable IoT function.
The Device starts detecting the temperature and humidity data from the camera and display
on the Realtime Display interface.
(Optional) Set temperature displaying mode.
When Show°F (Fahrenheit Degree) is selected, the temperature will be displayed by
Fahrenheit degree in Realtime Display tab.
5.12.2.2 Viewing Temperature and Humidity Data
You can view the temperature and humidity data on the Realtime Display interface after the IoT
function is enabled.
In the Refresh Interval box, select data refresh interval. For example, you can select 5 Sec.
You can also display the temperature and humidity data in graphical way by selecting the Display
Chart check box to.