User Manual

User’s Manual
219
 Select the library, and then click Modeling. The system will extract the attributes of face
pictures in the library for the future comparison.
 Select the library, and then click Delete to delete the library.
Adding Face Pictures
You can add face pictures to the existing libraries one by one or by batch, or add from the detected
faces.
To add face pictures one by one or by batch, you need to get the pictures from the USB storage
device. The picture size should be smaller than 256K with resolution between 200×200–6000×5000.
Adding One Face Picture
Select Main Menu > AI > Database > Face Database Config.
The Face Database Config interface is displayed.
Click of the library that you want to configure.
The Details interface is displayed.