User Manual

User’s Manual
199
5.11.2 For Lite AI Series
AI module provides SMD (Smart Motion Detection) and IVS functions. These functions take effect after
they are configured and enabled. It adopts deep learning and can realize precision alarms. You can
only enable one of them to the same channel at the same time.
 SMD: The device can detect and classify humans and vehicles in the image.
 IVS: The IVS function processes and analyzes the human and vehicle images to extract the key
information to match with the preset rules. When the detected behaviors match with the rules,
the system activates alarms. The IVS function can avoid wrong alarms by filtering the factors such
as rains, light, and animals.
 Face detection: The Device can analyze the faces captured by the camera and link the configured
alarms. This function is available for XVR5X-I and XVR 7X-I series only.
 Face recognition: The Device can compare the captured faces with the face library and then link
the configured alarms. This function is available for XVR 7X-I series only.
SMD, face detection, face recognition and IVS cannot be enabled simultaneously on select models. For
details, see 5.1.4.2 Configuring General Settings.
5.11.2.1 SMD
The device can detect and classify humans and vehicles in the image.
5.11.2.1.1 Configuring SMD Parameters
Select Main Menu > AI > Parameters > SMD.
The SMD interface is displayed.
In the Channel list, select a channel that you want to configure face detection function, and
then enable it.
Configure the parameters.