User Manual

User’s Manual
79
Parameter Description
Saturation
Adjust the color shades. The bigger the value, the lighter the color will
become. This value does not influence the general image lightness.
The value ranges from 0 to 100. The default value is 50. The
recommended range is between 40 and 60.
Color Mode
In the Color Mode list, you can select Standard, Soft, Bright, Vivid,
Bank, Customized 1, Customized 2, Customized 3, and Customized
4.
The sharpness, hue, brightness, contrast and saturation will adjust
automatically according to the selected color mode.
EQ
Enhance the image effect. Adjust the effect value.
Click , image is adjusted to the optimized effect automatically.
Click , the current effect setting will be locked.
Only HD analog channel supports this function.
Position
Adjust the display position of the image in the channel window. The
value indicates pixel. The default value is 16.
This function is only supported by analog channel.
Custom
You can customize four color modes.
1. Click Custom. The Custom Color interface is displayed.
2. In the Color Mode list, select Custom 1, for example. Then
configure the settings for sharpness, hue, brightness, contrast
and saturation. If you select All, the configuration will apply to
all four customized color modes.
3. Click OK.
4. On the Image interface, in the Color Mode list, you can select
the customized color mode.
5.2.8 Live View Display
5.2.8.1 Configuring Display Settings
You can configure the display effect such as displaying time title and channel title, adjusting image
transparency, and selecting the resolution.
Select Main Menu > DISPLAY > Display.
The Display interface is displayed.