User Manual

User’s Manual
307
Parameter Description
Picture Upload Interval
(Sec.)
If this interval is longer than snapshot interval, the system takes
the recent snapshot to upload. For example, the interval is 5
seconds, and snapshot interval is 2 seconds per snapshot, the
system uploads the recent snapshot every 5 seconds.
If this interval is shorter than snapshot interval, the system
uploads the snapshot per the snapshot interval. For example, the
interval is 5 seconds, and snapshot interval is 10 seconds per
snapshot, the system uploads the snapshot every 10 seconds.
To configure the snapshot interval, select
Main Menu >
CAMERA > Encode > Snapshot.
Channel Select the channel that you want to apply the FTP settings.
Day
Select the week day and set the time period that you want to upload
the recorded files. You can set two periods for each week day.
Period 1, Period 2
Record type
Select the record type (Alarm, Intel, MD, and General) that you want to
upload. The selected record type will be uploaded during the
configured time period.
Click Test.
The system pops up a message to indicate success or failure. If failed, check the network
connection or configurations.
Click Apply to complete the settings.
Security Center
You can set security options to strengthen device security and use the device in a much safer way.
5.19.1 Security Status
Security scanning helps get a whole picture of device security status. You can scan user, service and
security module status for detailed information about the security status of the device.
Detecting User and Service
Green icon represents a healthy status of the scanned item, and orange icon represents a risky status.
●
Login authentication: When there’s a risk in the login authentication, the icon will be in orange to
warn risk. You can click
Details
to see the detailed risk description.
● Configuration Security: When there’s a risk in the device configuration, the icon will be in orange
to warn risk. You can click Details to see the detailed risk description.