User Manual

Table Of Contents
Users Manual
296
Configuring the settings for the HDD manager.
HDD type setting: In the Properties list, select Read/Write, Read Only, and then click
Apply to save the settings.
HDD format: Select the HDD that you want to format, click Format, and enable Clear
HDD database in the pop-up message, click OK and enter the password of admin
user in the prompted dialog box, click OK and then following the on-screen
instructions to complete formatting.
Formatting HDD will erase all data on the disk, proceed with caution.
5.18.4 Configuring Record
Record type includes auto and manual record. You can configure record type of main stream and sub
stream. See "5.7 Configuring Record Settings".