User Manual

User’s Manual
271
Preparation for Configuration
 Install the software that can manage and control the SNMP, such as MIB Builder and MG-SOFT MIB
Browser
 Obtain the MIB files that correspond to the current version from the technical support.
Configuration Steps
Select Main Menu > NETWORK > SNMP.
Configure the settings for the SNMP parameters.
Parameter Description
Enable Enable the SNMP function.
Version
Select the check box of SNMP version(s) that you are using.
The default version is V3. There is a risk of select V1 or V2.
SNMP Port Indicates the monitoring port on the agent program.
Read Community
Indicates the read/write strings supported by the agent program.
Write Community
Trap Address
Indicates the destination address for the agent program to send the
Trap information.
Trap Port
Indicates the destination port for the agent program to send the Trap
information.
Read-Only Username
Enter the user name that is allowed to access the Device and has the
"Read Only" permission.