User Manual

User’s Manual
212
 To add a mark to the file, select the files and then click Add Tag.
5.11.2.3 Face Detection (For XVR5X-I and XVR7X-I series only)
Some series of devices can analyze the pictures captured by the camera to detect whether the faces
are on the pictures. You can search and filter the recorded videos the faces and play back.
If you select AI by device, then among face detection and recognition, IVS function, you can use one
of them at the same time for the same channel.
5.11.2.3.1 Configuring Face Detection Parameters
The alarms are generated according to the configured parameters.
Select Main Menu > AI > Parameters > Face Detection.
The Face Detection interface is displayed.
In the Channel list, select a channel that you want to configure face detection function, and
then enable it.
Configure the parameters.
Parameter Description
Rule
Click View Setting to draw areas to filter the target.
You can configure two filtering targets (maximum size and minimum
size). When the target is smaller than the minimum size or larger than
the maximum size, no alarms will be activated. The maximum size
should be larger than the minimum size.
Schedule
Define a period during which the detection is active.
For details, see "Setting Motion Detection Period" section in "5.10.4.1
Configuring Motion Detection Settings."