User Manual

User’s Manual
209
Parameter Description
Name Enter the customized rule name.
Action
Configure the actions that are defined as intrusion. You can select the
Appear check box and the Cross check box.
Direction
In the Direction list, select the direction of crossing the configured
area. You can select Enter&Exit, Enter, and Exit.
Target Filter
Click to draw areas to filter the target.
You can configure two filtering targets (maximum size and minimum
size). When the target that is crossing the tripwire is smaller than the
minimum size or larger than the maximum size, no alarms will be
activated. The maximum size should be larger than the minimum size.
Effective Target
Enable the AI Recognition function ( ). By default, Human and
Motor Vehicle are selected for alarm object.
4) Drag to draw an area.
5) Click OK to save the settings.
Click to set the actions to be triggered. For details, see 0.
Select the Enable check box, and then click Apply.
The intrusion detecting function is active. When the target enters and leaves the area, or the
target appears in the defined area, the system activates alarms.
5.11.2.2.2 Smart Search for IVS Function
You can search for the intelligent events and play back.
Select Main Menu > AI > AI Search > IVS.
The IVS interface is displayed.
In the Channel list, select the channel that you want to search for the events, and then set
other parameters such as start time, end time, event type, and alarm object.
Click Smart Search.
The results that satisfy the searching conditions are displayed.