User Manual

User’s Manual
201
Parameter Description
Picture Storage
Select the Snapshot check box to take a snapshot of the selected
channel.
To use this function, select
Main Menu > CAMERA > Encode >
Snapshot, in the Type list, select Event.
Sub Screen
Select the check box to enable the function. When an alarm event
occurs, the extra screen outputs the settings configured in Main
Menu > DISPLAY > Tour > Sub Screen.
 Not all models support this function.
 To use this function, extra screen shall be enabled.
Video Matrix
Select the check box to enable the function. When an alarm event
occurs, the video output port outputs the settings configured in Main
Menu > DISPLAY > Tour.
Not all models support this function.
Buzzer Select the check box to activate a buzzer noise at the Device.
Log Select the check box to enable the Device to record a local alarm log.
Alarm Tone
Select to enable audio broadcast/alarm tones in response to a motion
detection event.
White Light Select the check box to enable white light alarm of the camera.
Siren Select the check box to enable sound alarm of the camera.
Click Apply to complete the settings.
5.11.2.1.2 Searching for SMD Reports
You can search the detection history by channel, object type, and time.
Select Main Menu > AI > AI Search > SMD.
The SMD interface is displayed.
Select the channel, enter the start time and end time, and select the object type you need.
Click Search.
The results are displayed.
5.11.2.2 Configuring IVS Function
The IVS function processes and analyzes the images to extract the key information to match with the
preset rules. When the detected behaviors match with the rules, the system activates alarms.