User Manual

User’s Manual
123
5.7.1 Enabling Record Control
 Manual recording operation requires the user have the permission to access STORAGE settings.
 Check to ensure the HDD installed in the Device has been formatted properly.
To enter the record control interface, do the following:
Right-click on the live view screen, the shortcut menu is displayed. On the shortcut menu,
select Manual Control > Record Control.
The Record Mode interface is displayed.
Configure the settings for the record control parameters.
Parameter Description
Channel
Displays all the analog channels and the connected digital channels. You
can select a single channel or select All.
Main Stream/Sub
Stream
Auto: Automatically record according to the r
ecord type and
recording time as configured in the recording schedule.
Manual: Keep general recording for 24 hours for the selected channel.
Stop: Do not record.
Snapshot Enable or disable the scheduled snapshot for the corresponding channels.
Click Apply.
5.7.2 Configuring Recorded Video Storage Schedule
You need to configure the storage schedule for the recorded video so that the recorded video can be
saved. For details, see "5.1.4.9 Configuring Recorded Video Storage Schedule."