User Manual

User’s Manual
103
5.5.3 Configuring Snapshot Settings
Select Main Menu > CAMERA > Encode > Snapshot.
The Snapshot interface is displayed.
Configure the settings for the snapshot parameters.
Parameter Description
Manual Snapshot
In the Manual Snapshot list, select how many snapshots you want to take
each time.
Channel
In the Channel list, select the channel that you want to configure the
settings for.
Type
In the Type list, you can select Scheduled, Event, or Face Snapshot as the
event type for which you want to take a snapshot.
Scheduled: The snapshot is taken during the scheduled period.
Event: The snapshot is taken when there is an alarm event occurs, such
as motion detection event, video loss, and local alarms.
Face Snapshot: The snapshot is taken when the face is detected. The
face detection function is support only with the Channel 1.
Size
In the Size list, select a value for the image. The bigger the value is, the
better the image will become.
Quality
Configures the image quality by 6 levels. The higher the level, the better the
image will become.
Interval
Configures or customizes the snapshot frequency. You can select 1 second
per one snapshot to 7 seconds per one snapshot. The maximum is 3600
seconds per one snapshot.
Click Apply to complete the settings.