User Manual

5.5 Face Capture Configuration
Notes:
11. When adjusting image and video effect, you can click to capture a image and click
to record a video clip for testing. Pictures and videos are saved in your local computer.
12. Face capture function detects and captures faces in surveillance scenes. When the grading
of the detected face exceeds an algorithm-defined value, the PTZ camera channel captures
the face and triggers linkage actions. Set up Overlay & Capture, Rule and Advanced
Configuration before using the function.
13. For certain camera models, you need to select Face Capture on VCA Resource page first.
Configuration > System > System Settings
14. Face capture is only supported by certain camera models.
5.5.1 Overlay & Capture
Purpose:
You can choose to configure Display on Stream, Display on Picture, Snapshot Settings, Camera
Information, and Text Overlay on stream/picture.
Enter the Overlay & Capture configuration interface:
Configuration > Face Capture > Overlay & Capture
Overlay & Capture interface

Display on Stream: Check the checkbox, then the green frames will be displayed on the target
if in a live view or playback.

Display on Picture: Check the checkbox, then there will be a frame on the target on the
uploaded alarm picture if the checkbox is checked.

Snapshot Settings: You can set the quality and resolution for the captured picture.

Picture Quality from the dropdown list. High, Medium, and Low are selectable.