User Manual

presets are named already butand not configurable. Refer to the user manual for detailed
function description.)
5. You can click to delete the preset.
Note:
You can configure up to 272 256 presets.
 Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click to call the preset.
Calling a Preset
For convenient preset selection, refer to the following steps to navigate to the preset you want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
Notes:
 The following presets are predefined with special commands. You can only call them but not
configure them. For instance, preset 99 is the “Start auto scan”. If you call the preset 99, the
camera starts auto scan function.
 Pattern function varies depending on different camera models
.
Table 4-5
Special Presets
Preset Function Preset Function
33 Auto flip 92 Set manual limits
34 Back to initial position 9392
Save manual limitsSet
limit
35 Call patrol 1 9493
Remote reboot
Set limit
stops manually
36 Call patrol 2 9594
Call OSD menu
Remote
reboot
37 Call patrol 3 9695
Stop a scanC
all OSD
menu
38 Call patrol 4 9796
Start random scan
Stop
a scan
39
Day mode (IR cut filter
in)
9897
Start frame scan
Start
random scan
40
Night mode (IR cut filter
out)
9998
Start auto scan
Start
frame scan