User Manual

/
Mute/audio on and adjust volume
Click the button to enable quick setup of image/video related
parameters, including Specify Display, OSD and Video/Audio
parameters.
For detailed configuration, refer to Section 6.2
Configuring Video
and Audio Settings
and Section 6.3
Configuring Image Settings
for
more information.
Note:
Click to show the setting panel.
/ / / /
Click to select from
and display live video in
4:3/16:9/ original/original ratio/self-adaptive window size.
/ /
Click to select from and display live video with
the main/ sub/third stream. The main stream is with a relatively high
resolution and needs much more bandwidth. The default setting of
stream type is .
/
Click to select between
and play the live video via
player Web Ccomponents or Quick Time.
Note:
The live video is played via Wweb Cc
omponents by default, and other
types of
players are supported for the browser, such as MJPEG, and VLC.
You are required to download and install the player to play the live
video.
/
Steps:
1. Click and it displays appears . Click to enable two-
way audio when and the icon turns into .
2. Click the icon again to stop two-way audio.
Click the button to display pic
tures captured by camera.
Note: The function is only available for certain camera models
that
support face capture.
Notes:
 Double-click on the live video to switch the current live view into full-screen or return to
normal mode from the full-screen.Drag the slider to adjust the volume.
 Before using the two-way audio or recording with audio functions, set the Stream Type to
Video & Audio referring to Section 6.2.1 Configuring Video Settings.
4.4.2 Install Plug-in
Certain operation system and web browser may restrict the display and operation of the camera