User Manual

User Manual of Network Speed Dome

Chapter 4 Basic Operations

In this and the following chapters, operation of the speed dome by the web browser will be taken

as an example.

4.1 Power-up Action

After the power is appliedpower up, the speed dome will perform self-test action. It begins with

lens action and then pan/tilt movement.

After the self-test action, the system information of the speed dome including the model,

address, communication, version, and others will be displayed on screen for 40 seconds.

4.2 Configuring Local Parameters

The local configuration refers to the parameters of the live view and other operations using the

web browser.

For Google Chrome 57 and its above version or Mozilla Firefox 52 and its above version which are

plug-in free, Local functions is are hidden.

Steps:

1. Enter the Local Configuration interface:

Configuration > Local

2. Configure the following settings:

 Live View Parameters: Set the Pprotocol type, Pplay Pperformance, Rrules, Display POS

Information and Iimage Fformat.

 Protocol Type: TCP, UDP, MULTICAST and HTTP are selectable.

TCP: Ensures complete delivery of streaming data and better video quality, yet the real-

time transmission will be affected.

UDP: Provides real-time audio and video streams.

MULTICAST: It’s recommended to select the protocol type to MULTICAST when using

the Multicast function.

HTTP: Allows the same quality as of TCP without setting specific ports for streaming

under some network environments.

 Play Performance: Set the live view performance to Shortest Delay, Balanced, Fluent or

Custom. For Custom, you can set the frame rate for live view.

 Rules: You can enable or disable the rules of dynamic analysis for motion here.

 Display POS Information: Enable the function, feature information of the detected target

is dynamically displayed near the target in the live image.

 Image Format: The captured pictures can be saved as different format. JPEG and BMP

are available.