User Manual

RS-485 Settings
2. Set the RS-485 parameters and click to save the settings.
Note:
The Baud rate, PTZ Protocol and PTZ Address parameters of the camera should be exactly the
same as those of the control device.
VCA Resource
Purpose:
VCA Resource offers options to enable certain VCA functions and hide others. It helps allocate more
resources to the wanted functions. A reboot is required after setting the VCA Resource.
Steps:
1. Enter the VCA Resource interface:
Configuration> System > System Settings > VCA Resource
2. Select a desired VCA combination.
3. Click to save the settings. A reboot is needed for the settings to take
effect.
Notes:
 VCA Resource function varies according to different camera models.
 VCA options are mutually exclusive.
 The function may not be supported by some camera models.
About
Click View License, you can check Open Source Software Licenses.
6.4.2 Maintenance
Upgrade & Maintenance
 Rebooting the Camera
Steps:
3. Enter the Maintenance interface:
Formatted: Heading 4
Formatted: Font: Bold, Italic
Formatted: Font: Bold, Italic
Formatted: Don't add space between paragraphs of the
same style, Numbered + Level: 1 + Numbering Style: 1, 2, 3,
… + Start at: 1 + Alignment: Left + Aligned at: 0" + Indent at:
0.25"
Formatted: Indent: Left: 0.25", Don't add space between
paragraphs of the same style
Formatted: Font: 12 pt, Bold, English (United States)
Formatted: Numbered + Level: 1 + Numbering Style: 1, 2, 3,
… + Start at: 1 + Alignment: Left + Aligned at: 0" + Indent at:
0.25"
Formatted: Font: Bold, Italic, Font color: Red
Formatted: Font: Bold, Italic, Font color: Red
Formatted: Bulleted + Level: 1 + Aligned at: 0" + Indent at:
0.29"