User Manual

Integration Protocol Settings

2. Check the Enable ONVIF checkbox to enable the function.

3. Click Add to add a new ONVIF user. Set the user name and password, and confirm the

password. You can set the user as media user, operator, and administrator.

4. Click Modify to modify the information of the added ONVIF user.

5. Click Delete to delete the selected ONVIF user.

6. Click to save the settings.

Network Service

Purpose:

You can control the ON/OFF status of certain protocol that the camera supports.

Notes:

Supported services vary according to camera models.

Keep unused function OFF for security concern.

 WebSocket or WebSockets protocol are used for plug-in-free live view.

When you use Google Chrome 5745 and its above version or Mozilla Firefox 52 and its

above version to visit your camera, you should enable WebSocket or Websokets protocol.

Otherwise, live view function is not usable.

If the camera uses HTTP, enable WebSocket.

If the camera uses HTTPS, enable WebSockets.

 SDK Service and Enhanced SDK Service

If you want to add the device to the client software, you should enable SDK Service or

Enhanced SDK Service.

SDK Service: SDK protocol is used.

Enhanced SDK Service: SDK over TLS protocol is used. Communication between the

Formatted: Indent: Left: 0.58"

Formatted: Font: Bold

Formatted: Indent: Left: 0.58"

Formatted: Font: Bold