User Manual

HD-TVI Speed Dome User Manual
5
Panning and tilting:
Click the direction buttons to control the pan and tilt movement of the speed dome.
Zooming:
Click the ZOOM+ and ZOOM- buttons to control the zooming.
Focusing:
Click the FOCUS+ and FOCUS- buttons to adjust the focus.
Iris:
Click the IRIS+ and IRIS- buttons to adjust the iris.
2.3 System-defined Presets
Purpose:
The section lists the system-defined presets with special functions. These presets cannot be edited
but can be only called through a control device, e.g. a DVS or web browser. To call the
system-defined presets remotely, you can choose the preset number from the list in the PTZ control
panel. Please refer to table below for details.
For instance, preset 99 is the “Start auto scan”. If you call the preset 99, the speed dome starts auto
scan function.
Table 2-2 System-defined Presets
Preset NO. Function Preset NO. Function
33
Auto-flip 92 Enable limits
34 Return to home position 93 Set manual limits
35 Patrol 1 94 Remote reboot
36 Patrol 2 95 Access main menu
37 Patrol 3 96 Stop scanning
38 Patrol 4 97 Start Random Scanning
39 IR cut filter in 98 Start Frame Scanning
40 IR cut filter out 99 Start auto scanning
41 Pattern 1 100 Start tilt scanning
42 Pattern 2 101 Start panorama scanning
43 Pattern 3 102 Patrol 5
44 Pattern 4 103 Patrol 6
46 Enable fast patrol 104 Patrol 7
90 Enable Wiper 105 Patrol 8
2.4 On-screen Displays
The speed dome supports following on-screen displays:
Zoom Ratio: Identifies the amount of magnification. The format is ZXXX. XXX is the zoom amount.
PT Angle: Displays panning and tilting direction, with the format of NEXXX/TXXX. The NE followed
with XXX indicates the degrees in north east direction, while the T followed with XXX indicates the
degrees in tilt position.