Manual

29
Network Camera User Manual
4.5.2 Exception
This function can detect changes in the surveillance environment affected by the external
factors.
To set exception detection:
Go to ConfigEventException interface as shown below.
1. Enable the applicable detection that’s desired.
Scene Change Detection: Alarms will be triggered if the scene of the monitor video has
changed.
Video Blur Detection: Alarms will be triggered if the video becomes blurry.
Enable Video Color Cast Detection: Alarms will be triggered if the video becomes
obscured.
2. Set the alarm holding time and alarm trigger options. The setup steps are the same as
There are so many trees
near the road and cars
running on the road,
which make the scene too
complex to detect the
removal objects.