Manual

26
Network Camera User Manual
Day/Night Switch Linkage: Having selected this mode, choose to open or close alarm out
when the camera switches to day mode or night mode.
Schedule: Click “Add” and drag the mouse on the timeline to set the schedule of alarm out;
click “Erase” and drag the mouse on the timeline to erase the set time schedule. After this
schedule is saved, the alarm out will be triggered in the specified time.
4.4.5 Alarm Server
Go to AlarmAlarm Server interface as shown below.
Set the server address, port, heartbeat and heartbeat interval. When an alarm occurs, the
camera will transfer the alarm event to the alarm server. If an alarm server is not needed, there
is no need to configure this section.
4.5 Event Configuration (Optional)
(Only some specified versions support the following functions).
For more accuracy, here are some recommendations for installation.
 Cameras should be installed on stable surfaces, as vibrations can affect the accuracy of
detection.
 Avoid pointing the camera at the reflective surfaces (like shiny floors, mirrors, glass,
lake surfaces and so on).
 Avoid places that are narrow or have too much shadowing.
 Avoid scenario where the object’s color is similar to the background color.