Manual

Network Camera User Manual

1. Click “Enable” and set the alarm type, alarm holding time and sensor name.

2. Set alarm trigger options. The setup steps are the same as motion detection. Please refer to

motion detection chapter for details.

3. Click “Save” button to save the settings.

4. Set the schedule of the sensor alarm. The setup steps of the schedule are the same as the

schedule recording setup. (See Schedule Recording).

4.4.4 Alarm Out

This function is only available for some models. Go to ConfigAlarmAlarm Out.

Alarm Out Mode: Alarm linkage, manual operation, day/night switch linkage and schedule

are optional.

Alarm Linkage: Having selected this mode, select alarm out name and alarm holding time at

the “Alarm Holding Time” pull down list box.

Manual Operation: Having selected this mode, click “Open” to trigger the alarm out

immediately; click “Close” to stop alarm.