Quick Start Guide

V
WARNING
 Modify the default password after login to prevent from being stolen.
 Use the accessories regulated by the manufacturer. The Camera should be installed and
maintained by professionals.
 Internal and external ground connection should be stable.
 Do not provide two or more power supply modes to the Camera, otherwise, it may cause
damage to the Camera.
 A 2.5 m control cable is provided when the Camera leaves factory. It should use
explosion-proof flexible tube or armor cable to protect when the control cable is connected
to the explosion-proof control cabinet.
 Cut off power before Camera maintenance and overhaul. Opening the cover with power on
in the explosion environment is prohibited.
 Make sure all the explosion-proof components and parts are complete without any cracks
and there is no defect which might affect explosion-proof performance.
 Contact the local dealer or the nearest service center if the Camera fails to work normally.
Do not dismantle or modify the Camera.