Operation Manual
Table Of Contents
- Foreword
- 1 Product Introduction
- 2 Basic Settings
- 3 Daily Operation
- 3.1 Live
- 3.2 PTZ
- 3.2.1 Bullet Cameras
- 3.2.2 Speed Dome Cameras & Pan Tilt Cameras
- 3.2.2.1 Configuring Protocol
- 3.2.2.2 Configuring PTZ Functions
- 3.2.2.2.1 Configuring Preset
- 3.2.2.2.2 Configuring Tour
- 3.2.2.2.3 Configuring Scan
- 3.2.2.2.4 Configuring Pattern
- 3.2.2.2.5 Configuring Pan
- 3.2.2.2.6 Configuring PTZ Speed
- 3.2.2.2.7 Configuring Idle Motion
- 3.2.2.2.8 Configuring Power Up
- 3.2.2.2.9 Configuring Time Task
- 3.2.2.2.10 Restarting PTZ Manually
- 3.2.2.2.11 Restoring PTZ to the Default Settings
- 3.2.2.3 Operating PTZ
- 3.2.2.4 Configuring Preset Backup
- 3.3 Playback
- 3.4 Reports
- 3.5 Alarm
- 4 Setting
- 4.1 Configuring Camera
- 4.1.1 Configuring Lens
- 4.1.2 Configuring Video Parameters
- 4.1.3 Configuring Audio Parameters
- 4.2 Configuring Network
- 4.3 Peripheral
- 4.4 Smart Thermal
- 4.5 Event
- 4.6 Temperature Measuring Settings
- 4.7 Storage Management
- 4.8 System Management
- 4.1 Configuring Camera
- 5 System Maintenance
- 6 Additional Accessing Methods
- Appendix 1 Cybersecurity Recommendations
2
Application scenarios
Functions
Live
Table 1-1 Function description
Function Description
Live
You can view both the visible images and thermal images.
You can use thermal images to identify an object, and then use visible images
to view more details of the object.
PTZ operation
For those cameras with PTZ, you can use the PTZ to operate the cameras to
enlarge the surveillance range and identify details of an object.
For bullet cameras, you can set a bullet camera’s PTZ functions such as
preset, tour and pattern.
You can set a speed dome camera’s PTZ functions or a pan & tilt camera’s
PTZ functions such as preset, tour, pattern, horizontal
rotation, PTZ
speed, free action, boot action and timing task.
Voice intercom
For cameras with voice intercom function, you can talk indoors with a person
near the outdoor monitor to facilitate problem solution.
Snapshot
When previewing, you can snapshot an abnormal image for further check and
handling.
Local recording
When previewing, you can record abnormal images for further check and
handling.
Real-time reports
For cameras with temperature measuring, you can check the real-time
temperature data of your monitoring area.