Operation Manual
Table Of Contents
- Foreword
- 1 Product Introduction
- 2 Basic Settings
- 3 Daily Operation
- 3.1 Live
- 3.2 PTZ
- 3.2.1 Bullet Cameras
- 3.2.2 Speed Dome Cameras & Pan Tilt Cameras
- 3.2.2.1 Configuring Protocol
- 3.2.2.2 Configuring PTZ Functions
- 3.2.2.2.1 Configuring Preset
- 3.2.2.2.2 Configuring Tour
- 3.2.2.2.3 Configuring Scan
- 3.2.2.2.4 Configuring Pattern
- 3.2.2.2.5 Configuring Pan
- 3.2.2.2.6 Configuring PTZ Speed
- 3.2.2.2.7 Configuring Idle Motion
- 3.2.2.2.8 Configuring Power Up
- 3.2.2.2.9 Configuring Time Task
- 3.2.2.2.10 Restarting PTZ Manually
- 3.2.2.2.11 Restoring PTZ to the Default Settings
- 3.2.2.3 Operating PTZ
- 3.2.2.4 Configuring Preset Backup
- 3.3 Playback
- 3.4 Reports
- 3.5 Alarm
- 4 Setting
- 4.1 Configuring Camera
- 4.1.1 Configuring Lens
- 4.1.2 Configuring Video Parameters
- 4.1.3 Configuring Audio Parameters
- 4.2 Configuring Network
- 4.3 Peripheral
- 4.4 Smart Thermal
- 4.5 Event
- 4.6 Temperature Measuring Settings
- 4.7 Storage Management
- 4.8 System Management
- 4.1 Configuring Camera
- 5 System Maintenance
- 6 Additional Accessing Methods
- Appendix 1 Cybersecurity Recommendations
67
Audio
Configure Audio parameters. See Table 4-12.
Table 4-12 Parameters
Parameters Description
Enable
Audio can be enabled only when video is enabled.
Enable Main Stream or Sub Stream, and the network stream is
composed of both audio and video streams. If you do not select Main
Stream or Sub Stream, then only video images are transmitted.
Encode Mode
You can select audio encode mode. G.711A, G.711Mu, and AAC are
included.
The configured audio encode mode applies to audio and intercom.
Sampling
Frequency
Audio’s sampling frequency. 8K and 16K are included.
Audio in Type
Two audio types are selectable.
Linein: External audio input source is required.
Mic: External audio input source is not required.
Noise Filter Enable this function, and the system auto filters ambient Noise.
Microphone
Volume
Adjusts microphone volume.
This function is not available for all Cameras.
Speaker Volume
Adjusts speaker volume.
This function is not available for all Cameras.