Operation Manual
Table Of Contents
- Foreword
- 1 Product Introduction
- 2 Basic Settings
- 3 Daily Operation
- 3.1 Live
- 3.2 PTZ
- 3.2.1 Bullet Cameras
- 3.2.2 Speed Dome Cameras & Pan Tilt Cameras
- 3.2.2.1 Configuring Protocol
- 3.2.2.2 Configuring PTZ Functions
- 3.2.2.2.1 Configuring Preset
- 3.2.2.2.2 Configuring Tour
- 3.2.2.2.3 Configuring Scan
- 3.2.2.2.4 Configuring Pattern
- 3.2.2.2.5 Configuring Pan
- 3.2.2.2.6 Configuring PTZ Speed
- 3.2.2.2.7 Configuring Idle Motion
- 3.2.2.2.8 Configuring Power Up
- 3.2.2.2.9 Configuring Time Task
- 3.2.2.2.10 Restarting PTZ Manually
- 3.2.2.2.11 Restoring PTZ to the Default Settings
- 3.2.2.3 Operating PTZ
- 3.2.2.4 Configuring Preset Backup
- 3.3 Playback
- 3.4 Reports
- 3.5 Alarm
- 4 Setting
- 4.1 Configuring Camera
- 4.1.1 Configuring Lens
- 4.1.2 Configuring Video Parameters
- 4.1.3 Configuring Audio Parameters
- 4.2 Configuring Network
- 4.3 Peripheral
- 4.4 Smart Thermal
- 4.5 Event
- 4.6 Temperature Measuring Settings
- 4.7 Storage Management
- 4.8 System Management
- 4.1 Configuring Camera
- 5 System Maintenance
- 6 Additional Accessing Methods
- Appendix 1 Cybersecurity Recommendations
63
You can drag the "Time Title" box in the video image with your mouse to adjust the box’s
location.
Click Save.
4.1.2.3.4 Configuring OSD Info
Enable this function if you want to display words on the video image.
Text Overlay and Picture Overlay can’t work at the same time.
This function is available on select models and the actual interface shall prevail.
Select Setting > Camera > Video > Overlay.
The Overlay interface is displayed.
Click OSD Info.
The OSD Info interface is displayed. See Figure 4-18.
OSD Info
Select the Enable check box of Text Overlay, and enter text based on your own needs. Then,
select the text align method, and the OSD Info box is displayed on the video image.
You can drag the OSD Info box on the video image with your mouse to adjust the box’s
location.
Click Save.
4.1.2.3.5 Configuring Font
You can adjust size and color of the font in the video images based on your own needs.
Select Setting > Camera > video > Overlay.
The Overlay interface is displayed.
Click the Font tab.
The Font interface is displayed. See Figure 4-19.