Operation Manual
Table Of Contents
- Foreword
- 1 Product Introduction
- 2 Basic Settings
- 3 Daily Operation
- 3.1 Live
- 3.2 PTZ
- 3.2.1 Bullet Cameras
- 3.2.2 Speed Dome Cameras & Pan Tilt Cameras
- 3.2.2.1 Configuring Protocol
- 3.2.2.2 Configuring PTZ Functions
- 3.2.2.2.1 Configuring Preset
- 3.2.2.2.2 Configuring Tour
- 3.2.2.2.3 Configuring Scan
- 3.2.2.2.4 Configuring Pattern
- 3.2.2.2.5 Configuring Pan
- 3.2.2.2.6 Configuring PTZ Speed
- 3.2.2.2.7 Configuring Idle Motion
- 3.2.2.2.8 Configuring Power Up
- 3.2.2.2.9 Configuring Time Task
- 3.2.2.2.10 Restarting PTZ Manually
- 3.2.2.2.11 Restoring PTZ to the Default Settings
- 3.2.2.3 Operating PTZ
- 3.2.2.4 Configuring Preset Backup
- 3.3 Playback
- 3.4 Reports
- 3.5 Alarm
- 4 Setting
- 4.1 Configuring Camera
- 4.1.1 Configuring Lens
- 4.1.2 Configuring Video Parameters
- 4.1.3 Configuring Audio Parameters
- 4.2 Configuring Network
- 4.3 Peripheral
- 4.4 Smart Thermal
- 4.5 Event
- 4.6 Temperature Measuring Settings
- 4.7 Storage Management
- 4.8 System Management
- 4.1 Configuring Camera
- 5 System Maintenance
- 6 Additional Accessing Methods
- Appendix 1 Cybersecurity Recommendations
47
Brightness
Changes the value to adjust the picture brightness. The bigger the value is, the
brighter the picture will be.
Contrast
Changes the contrast of the picture. The bigger the value is, the more the
contrast will be between bright and dark areas.
Saturation
Makes the color deeper or lighter. The bigger the value is, the deeper the color
will be. Saturation value doesn’t change image brightness.
Chroma CNT
Reduces the image color and prevents it from being too strong. The bigger the
value, the better the effect.
Sharpness
Changes the sharpness of picture edges. The bigger the value is, the clearer the
picture edges will be, and if the value is set too big, picture noises are more
likely to appear.
Sharpness CNT The bigger the value, the stronger the sharpness CNT.
Gamma
Changes the picture brightness and improves the picture dynamic range in a
non-linear way. The bigger the value is, the brighter the picture will be.
Flip
In the Flip list, select 180° and the video image will be turned upside down.
Select 0° and the video image returns to its primary condition.
EIS
Select the On check box to enable this function.
Corrects the Camera shaking with difference comparison algorithm and
improves the image clarity, effectively solves the picture shaking problem.
4.1.1.1.2 Configuring Exposure
Click the Exposure tab.
The Exposure interface is displayed. See Figure 4-2.
The exposure interface
Configure exposure parameters. See Table 4-2.
Parameters and its description in Table 4-2 are based on the condition that you have
selected Standard as Profile.