Operation Manual

31
The time task interface
Configure time task.
1) Select the Enable check box to enable this function.
2) Select a Time Task Num.
3) Select a Time Task Action from Preset, Tour, Scan and Pattern.
When you set Preset as Time Task Action, the Action Number selection box is
displayed. You can select the action number based on your needs.
4) In the Auto Home selection box, set the time for the camera to return to its previous
condition.
Auto home time: Time for your camera to return to its previous condition and continue
the time task when the time task is interrupted by human operation.
5) Click Period Setting to set the detailed period for a time task.
6) Click Save.
(Optional) Copy a time task.
Copy task information you have configured to other tasks.
1) Select a Time Task Num you have already configured.
2) In Copy To Task No., select a task number to be configured.
3) Click Copy.
4) Click Save to finish task copy.
3.2.2.2.10 Restarting PTZ Manually
Select Setting > PTZ > Function > PTZ Restart.
The PTZ Restart interface is displayed. See Figure 3-24.