Operation Manual
Table Of Contents
- Foreword
- 1 Product Introduction
- 2 Basic Settings
- 3 Daily Operation
- 3.1 Live
- 3.2 PTZ
- 3.2.1 Bullet Cameras
- 3.2.2 Speed Dome Cameras & Pan Tilt Cameras
- 3.2.2.1 Configuring Protocol
- 3.2.2.2 Configuring PTZ Functions
- 3.2.2.2.1 Configuring Preset
- 3.2.2.2.2 Configuring Tour
- 3.2.2.2.3 Configuring Scan
- 3.2.2.2.4 Configuring Pattern
- 3.2.2.2.5 Configuring Pan
- 3.2.2.2.6 Configuring PTZ Speed
- 3.2.2.2.7 Configuring Idle Motion
- 3.2.2.2.8 Configuring Power Up
- 3.2.2.2.9 Configuring Time Task
- 3.2.2.2.10 Restarting PTZ Manually
- 3.2.2.2.11 Restoring PTZ to the Default Settings
- 3.2.2.3 Operating PTZ
- 3.2.2.4 Configuring Preset Backup
- 3.3 Playback
- 3.4 Reports
- 3.5 Alarm
- 4 Setting
- 4.1 Configuring Camera
- 4.1.1 Configuring Lens
- 4.1.2 Configuring Video Parameters
- 4.1.3 Configuring Audio Parameters
- 4.2 Configuring Network
- 4.3 Peripheral
- 4.4 Smart Thermal
- 4.5 Event
- 4.6 Temperature Measuring Settings
- 4.7 Storage Management
- 4.8 System Management
- 4.1 Configuring Camera
- 5 System Maintenance
- 6 Additional Accessing Methods
- Appendix 1 Cybersecurity Recommendations
25
3.2.2.2.2 Configuring Tour
By configuring tour, you can put the presets to the auto tour group to make the camera move back
and forward quickly and automatically according to the presets.
Preparation
You have set several presets.
Procedure
Select Setting > PTZ > Function > Tour.
The Tour interface is displayed. See Figure 3-16.
The tour interface
Configure tour.
1) Click Add to add a tour.
2) Click Add to add a preset.
Click repeatedly to add several presets.
3) Double-click to select a preset. And double-click to configure the lasting time.
4) Double-click the touring name that you have added to modify it. Click Save.
Click to delete a tour or a preset.
Select a tour and click Start to start camera tour.
Click Stop to stop the tour.
3.2.2.2.3 Configuring Scan
You can configure an arc and horizontal area for your camera PTZ’s rotation. Then by giving your PTZ
a fixed rotation speed, you can get your camera scan from left to right (and from right to left) at a
fixed speed.