Operation Manual
Table Of Contents
- Foreword
- 1 Product Introduction
- 2 Basic Settings
- 3 Daily Operation
- 3.1 Live
- 3.2 PTZ
- 3.2.1 Bullet Cameras
- 3.2.2 Speed Dome Cameras & Pan Tilt Cameras
- 3.2.2.1 Configuring Protocol
- 3.2.2.2 Configuring PTZ Functions
- 3.2.2.2.1 Configuring Preset
- 3.2.2.2.2 Configuring Tour
- 3.2.2.2.3 Configuring Scan
- 3.2.2.2.4 Configuring Pattern
- 3.2.2.2.5 Configuring Pan
- 3.2.2.2.6 Configuring PTZ Speed
- 3.2.2.2.7 Configuring Idle Motion
- 3.2.2.2.8 Configuring Power Up
- 3.2.2.2.9 Configuring Time Task
- 3.2.2.2.10 Restarting PTZ Manually
- 3.2.2.2.11 Restoring PTZ to the Default Settings
- 3.2.2.3 Operating PTZ
- 3.2.2.4 Configuring Preset Backup
- 3.3 Playback
- 3.4 Reports
- 3.5 Alarm
- 4 Setting
- 4.1 Configuring Camera
- 4.1.1 Configuring Lens
- 4.1.2 Configuring Video Parameters
- 4.1.3 Configuring Audio Parameters
- 4.2 Configuring Network
- 4.3 Peripheral
- 4.4 Smart Thermal
- 4.5 Event
- 4.6 Temperature Measuring Settings
- 4.7 Storage Management
- 4.8 System Management
- 4.1 Configuring Camera
- 5 System Maintenance
- 6 Additional Accessing Methods
- Appendix 1 Cybersecurity Recommendations
23
3 PTZ function
For detailed operations of PTZ, see "3.2.1.2 Configuring PTZ
Functions."
3.2.1.4 Configuring Preset Backup
You can export presets you have set to back them up. When you need those presets, you can import
them to your Camera and restore them.
If you want to export or import presets, you have to obey the following steps.
Select Setting > PTZ > Preset Backup.
The Preset Backup interface is displayed.
Preset backup
Export or import presets.
Click Export to export presets for backup.
Click Import to import presets you have already backed up
3.2.2 Speed Dome Cameras & Pan Tilt Cameras
3.2.2.1 Configuring Protocol
For external Cameras (such as network keyboard, NVR), if you want to use them to control the dome
camera or its PTZ, you need to set the protocol to connect the external Cameras to the dome camera
or its PTZ first.
Select Setting > PTZ > Protocol.
The Network PTZ interface is displayed. See Figure 3-14.
Network PTZ setting
Select the protocol that is matched with the camera.
Click Save.