Operation Manual

161
Type
The log type includes "all, system, setting, data, event, record, account and
safety."
All: All log information.
System: Includes program launch, force exit, exit, program reboot, Camera
turn off/reboot, system reboot and system upgrade.
Setting: Includes save configuration and delete configuration file.
Data: Includes configure disk type, erase data, hot swap, FTP state, NAS
state, record mode, SD card error and hard disk error.
Event (Records events such as video detection, smart
plan, alarm and
abnormality): Includes event start and event end.
Record: Includes file access, file access error and file search.
User Management: Includes log in, log out, add user, delete user, modify
user, add group, delete group and modify group.
Safety: Includes password reset and IP filter.
Click Search.
The needed logs are displayed. See Figure 5-8.
 Click a log, and then you can view the detailed information in Detailed Information
area.
 Click Backup, and then you can back up all the found logs to your PC.
Log information
5.6.2 Remote View
Enable this function to remotely check logs in your Camera.
Select Setting > Information > Log.
The Remote Log interface is displayed. See Figure 5-9.
Remote Log
Select the Enable check box.
Set IP Address, Port and Camera Number. Then click Save.